How to Read an EV Window Sticker: MPGe, Range, kWh/100 mi

Every new EV sold in the US carries an EPA Monroney sticker with four numbers that matter: MPGe (efficiency), range in miles, kWh/100 miles (energy use), and estimated annual fuel cost. MPGe lets you compare an EV's efficiency to a gas car's MPG, while kWh/100 miles is the number that actually predicts your electric bill. Once you know what each box means, you can compare two EVs — or an EV to a gas car — in about 30 seconds.
What is MPGe on an EV window sticker?
MPGe stands for "miles per gallon equivalent." The EPA created it so shoppers could compare an electric car's efficiency to a gasoline car's using a familiar unit. The conversion is based on the energy content of a gallon of gasoline (33.7 kWh), not on any dollar cost.
A higher MPGe means the car uses less energy to go the same distance. Most EVs on sale today land somewhere between 90 and 140 MPGe combined, depending on size, weight, and aerodynamics. For context, a typical gas sedan gets 28–35 MPG, so even a "low" MPGe electric car is usually far more efficient than its gas equivalent.
What MPGe does not tell you is what you'll pay to drive. Electricity prices vary far more than gasoline prices do by region and by time of day, so two cars with the same MPGe can cost very different amounts to charge depending on where you live.
Where to find it and what it's good for
- Look in the top-left area of the sticker, usually in large type next to "City/Highway/Combined."
- Use MPGe to shop across different EVs or to compare an EV to a hybrid or gas car in rough efficiency terms.
- Don't use MPGe alone to estimate your monthly fuel cost — that's what kWh/100 miles is for.
What does kWh/100 miles actually mean?
This is the number serious EV shoppers should focus on. It tells you how many kilowatt-hours of electricity the car uses to travel 100 miles, under EPA test conditions. Lower is better.
Most new EVs fall somewhere between 25 and 40 kWh/100 miles. A compact or aerodynamic sedan might sit near 25–28 kWh/100 mi, while a heavier SUV or truck can run 35–45 kWh/100 mi or more. You'll typically see separate city, highway, and combined figures, similar to gas-car MPG ratings.
Why this matters more than MPGe: your utility charges you per kilowatt-hour, not per "equivalent gallon." If you know your electricity rate, you can turn kWh/100 miles directly into a cost-per-mile figure.
Quick way to estimate your own cost per mile
- Find the car's combined kWh/100 miles on the sticker (or on fueleconomy.gov).
- Find your electricity rate in cents per kWh — check a recent utility bill, since rates vary by time of day and season in many states.
- Multiply: (kWh/100 mi ÷ 100) × your rate per kWh = cost per mile.
- Multiply that by your typical monthly mileage to estimate a monthly charging cost.
Example math only (not a universal price): a car rated at 30 kWh/100 mi on a $0.15/kWh rate costs about 30 × 0.0015 = $0.045 per mile, or roughly $4.50 per 100 miles. Swap in your own numbers — rates range from under $0.10 to over $0.30 per kWh depending on the state, utility, and time of use. For a side-by-side with your actual rate and driving habits, run the numbers through the EV charging cost calculator instead of doing it by hand.
How to read the range number on the sticker
The range figure is the EPA's estimated number of miles the car can travel on a full charge, under mixed test conditions meant to approximate real-world driving. It's a composite of city and highway testing, not a worst-case or best-case number.
Treat it as a planning baseline, not a guarantee. Real-world range on any given day depends on:
- Outside temperature — cold weather is the biggest factor; expect noticeably less range in winter, especially on short trips before the cabin and battery warm up.
- Highway speed — EVs lose efficiency at sustained high speeds more than gas cars do, because aerodynamic drag dominates and there's no "highway MPG boost" the way gas engines sometimes get.
- Cabin heating/cooling, cargo weight, and driving style.
- Battery age and state of health, which matters more on used EVs — ask for a battery health report if one's available.
If the sticker range is 260 miles, a safe planning assumption for cold weather or highway-heavy trips is to mentally knock off 15–30%, then confirm against the automaker's own range tool or owner forums for that specific model.
MPGe vs. range vs. kWh/100 mi: what each one answers
| Sticker figure | What it tells you | What it doesn't tell you |
|---|---|---|
| MPGe | Overall efficiency vs. gas cars, for comparison shopping | Your actual electricity cost |
| kWh/100 miles | Energy used per 100 miles — the basis for cost math | Real-world range in your climate |
| Range (miles) | EPA estimate of miles on a full charge | Exact range on a cold day, at highway speed, or at 80% charge |
| Annual fuel cost (est.) | EPA's rough yearly cost based on a national average electricity rate and average miles driven | Your actual rate, your actual mileage, or public charging premiums |
The "estimated annual fuel cost" box is useful for a ballpark comparison between vehicles on the lot, but it assumes a national average electricity price and a standard annual mileage (typically 15,000 miles). If your rate is higher or lower than that average, or you drive more or less, your real number will differ — check the actual figure the EPA used that year on fueleconomy.gov, and compare it to your own utility rate.
How to compare two EV stickers side by side
- Match the trims. Range, MPGe, and kWh/100 mi all change with wheel size, battery pack option, and drivetrain (single-motor vs. dual-motor AWD). Make sure you're comparing the same configuration you'd actually buy.
- Line up combined MPGe first for a quick efficiency gut-check.
- Compare kWh/100 mi next, and plug both into the calculator with your own electric rate to see the real dollar difference over a year.
- Check range, but weight it against your actual commute and road-trip habits — an extra 40 miles of range matters a lot less if you charge at home every night.
- Note charge time figures if listed (often on a separate section or the automaker's spec sheet rather than the core Monroney box) — these usually show Level 2 home charging time and DC fast-charge time to 80%, which is a different question from efficiency.
FAQ
Is a higher MPGe always better? Generally yes, for comparing efficiency between EVs or against gas cars — but it doesn't factor in your local electricity price, your climate, or the car's price and features. Use it as one input, not the whole decision.
Why do two EVs with similar range have different kWh/100 mi numbers? Usually battery size and efficiency both play a role. A car can hit the same range as a competitor by pairing a less efficient drivetrain with a larger, more expensive battery pack, or a more efficient drivetrain with a smaller one. Check both numbers, not just range.
Does the sticker range match what I'll actually get? Not exactly — it's a lab-based estimate under mixed conditions. Cold weather, highway speeds, and cargo load can all reduce real-world range meaningfully. Confirm current model-year figures and any known caveats with the automaker or fueleconomy.gov before you buy.
How do I turn kWh/100 mi into a monthly cost estimate? Multiply the car's kWh/100 miles by your electric rate (cents per kWh) and your typical monthly mileage, dividing by 100 to scale correctly. It's easier to just enter your rate and mileage into the EV charging cost calculator and let it do the math for several vehicles at once.